Alternate Control Input - Siemens VersiCharge Manual De Instalación Y Funcionamiento

• Verify that the VersiCharge is disconnected from power when
changing the amperage adjustment dial.
Setting
Label
Current (A)
Current (%)
Power (kW)
• Circuit requirements
• Circuit must be sized for the max amperage requirement. Do not
de-rate breakers or conductors based on amperage adjustment.

3.6 Alternate control input

The Siemens VersiCharge has an alternate input, to allow the
VersiCharge to be controlled by an external device.
• Alternate control inputs are low voltage control wiring. Do not hook up
120 V to these connections.
© 2012 Siemens Industry, Inc.
0 1
MIN 25% 50%
6 7.5
minimum 25% 50%
1.44 1.8
- 23 -
2 3 4
75% MAX
15 22.5 30
75% maximum
3.6 5.4 7.2
Document Number: 813540