Haojue DM125 Manual De Uso página 104

BCAUTION
Spilled brake fluid can damage painted surfaces
and plastic parts.
Be careful not to spill any fluid when filling
the brake fluid reservoir.
immediately.
Brake discs and brake pads
Essential in a brake disc inspection: inspect whether
brake disc thickness 1 is smaller than 3.5 mm and, if it is,
replace the brake disc with a new one.
Essential in a front wheel brake pad inspection: inspect
whether the brake pad has been worn to or beyond the
limit line 2 and, if it has, replace the brake pad with a
new one.
BWARNING
After a new brake disc or pad is installed, do not
ride immediately but grasp and release the brake
handles several times to make the brake discs and
pads fully fit with each other, restore to their normal
holding forces and have the brake fluid circulate
stably.
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
Wipe splled fluid up
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BWARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value. After the brake discs and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized. Make sure there is an enough braking
distance when riding before that.
BWARNING
Fail to inspect and maintain the brakes pads or
brake disk, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disk or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disk and brake pads as
recommended.
FRONT BRAKE (DRUM BRAKE)
Adjustment of front brake lever
Free stroke 2 of the brake handle refers to the stroke
between the free position of the brake handle and the
position of the brake handle when it is grasped to make
41
(103)
EN
(103)