Left Handel Switches; Clutch Lever - Haojue DM125 Manual De Uso

(74) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
HIGH BEAM INDICATOR LIGHT 7 9
The high beam light indicator will light up when the high
beam headlight is turned on.
NEUTRAL GEAR INDICATOR LIGHT 8 N
When the gear is in the neutral position, this indicator will
light up. If others, this indicator will be off.
LEFT TURN SIGNAL INDICATOR LIGHT 9 = (DM125)
When the turn signal switch is pushed to left, the panel
left turn signal indicator light will flicker accordingly.
NOTE: If the turn signal fails to work due to a broken bulb
or faulty wire connection, the indicator on the dashboard
will remain light up continuously or flicker at a high
frequency.
TRIP METER (DM125)
It is mainly used to calculate distance of a trip, or for
calculation of fuel consumption.
TRIP METER RESET BUTTON
EN
Turn the knob counterclockwise to reset the trip meter
to zero.
RIGHT TURN SIGNAL INDICATOR LIGHT
(DM125)
When the turn signal switch is pushed to right, the panel
right turn signal indicator light will flicker accordingly.
NOTE: If the turn signal fails to work due to a broken bulb
or faulty wire connection, the indicator on the dashboard
will remain light up continuously or flicker at a high
frequency.
(74) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
(DM125)
8
12

LEFT HANDEL SWITCHES

DIMMER SWITCH 1
"'" position
The headlight low beam and taillight
will light up.
"9" position
The headlight high beam and
taillight will light up. The high beam
indicator on the dashboard will also be lit.
BCAUTION
Holding the dimmer switch between "9" and "'"
position will turn on both "9" and "'" headlight
beams. This operation can damage the motorcycle.
Use the dimmer switch only at "9" and "'"
position. Do not stick tape on the headlight or
place objects in front of the headlight.
OVERTAKING SWITCH 2 :
Press the switch to flash the headlight.

CLUTCH LEVER 3

The clutch lever is used for disengaging the drive to the
rear wheel when starting the engine or shifting gears.
Grasping the lever disengages the clutch.
HORN BUTTON 4 ,
Pressing this button will trigger the horn.
TURNING SIGNAL SWITCH 5 = 8
Moving the switch to the "=" position will engage the