Safety Helmet Lock (Saddle Lock); Dashboard - Haojue DM125 Manual De Uso

(72) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BWARNING
Never attempt to move the motorcycle when the
steering is locked.
BWARNING
Do not turn the ignition switch key to the "4"
position when riding the motorcycle, otherwise the
motorcycle will lose control.
NOTE: Only when the key hole is in the two positions in
the figure above can the key be completely inserted, pulled
out and turned and the ignition switch could be made on,
EN
off and locked. If the key is partially inserted into the key
hole, the key can be turned to any positions; however, the
key cannot be completely inserted into the ignition switch
and no function can be realized.
(72) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27

SAFETY HELMET LOCK (SADDLE LOCK)

To open the safety helmet lock,
insert the key into the lock hole
and anticlockwise turn it till the end.
To lock the safety helmet lock, fit
the snap ring on the safety helmet
into the safety helmet lock hook and
clockwise turn it.
When dismantling the saddle, insert the key into the lock
hole and turn it clockwise to make the saddle bounce off.
When installing the saddle, insert its front and then press
its rear until a crack is heard that suggests that the saddle
has been locked.
BWARNING
Never ride with a locked safety helmet. If doing so,
the safety helmet may be drawn into the rear wheel
causing the motorcycle to lose control and directly
endangering rider safety.

DASHBOARD

BCAUTION
Do not spray the dashboard with high-pressure
water directly.
10