Tires - Haojue DM125 Manual De Uso

2. Operate the braking system and inspect and make
sure the mark extending line 1 is in the allowed range
3 (see the figure) marked on the wear limit mark
2, otherwise have the component in the rear brake
replaced by a qualified distribution and maintenance
organization for safety.

TIRES

Periodic checks should be performed for tire pressure
and tire wear status. To ensure maximum safety and
life, check the tire frequently, in addition to the scheduled
inspections.
BWARNING
Tire pressure and wear status are very important
for the performance and safety of the motorcycle.
Be sure to check tire pressure and tire wear status
regularly.
Tire pressure
Under normal temperature, test the tire pressure by using
a tire pressure gauge, set the pressure base on the
pressure value recommended by this manual.
pressure is too high or too low, it will affect ride stability,
and will cause the tire to wear.
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
If the
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
Standard for tire pressure under normal temperature
Solo riding
kPa
Front wheel 175
Rear wheel 200
BWARNING
The tire pressures and surfaces are significant. If
they are neglected, the safety of the rider may be
endangered and the motorcycle may be damaged.
BWARNING
Please inspect the internal pressures and surfaces
of the tires of the motorcycle frequently.
Tire surface status
There are serial "T.W.I. ;" marks 1
(tire wear indicator) in the edge of
the tire. Check the bulge stock 2 of
T.W.I. in the tread near the mark. If
the tire wears off to reach the bulge
stock, the tire should be replaced.
Check the damage 3 (punctures or fractures) on the tire
surface visually. As surface damage may impede driving
stability, such tires should be replaced.
43
(105)
Double riding
kgf/cm 2 kPa kgf/cm 2
1.75 175 1.75
2.00 225 2.25
(105)
EN