SICK C2000 Manual Del Usuario página 308

Chapter 11
8008684/YJC8/2015-03-30
2 8 4
8 008 684/RI57/2007-11-28
Appendix
11.2 Diagrams and tables in the fold-out section
Safety notice in fold-out section (page 590)
11-1: The possibility of reaching over, under, around or behind the machine
must be prohibited.
Dimensional drawings and mechanical dimensions in fold-out
section (page 591 ... 602):
11-2: Dimensional drawings and mechanical dimensions of C 2000
"standard" (sender, receiver mirror-inverted), small housing,
swivel mount, height of protective field S 1 = 150 ... 1200 mm
a = Clamp 180°, pivoted (mounting kit 1)
s = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
d = Offset center
of emitting aperture h = Height of protective field
f = Alignment
11-3: Dimensional drawings and mechanical dimensions of C 2000
"standard" (sender, receiver mirror-inverted), large housing,
swivel mount, height of protective field S 1 = 1350 ... 1800 mm
a = Clamp 180°, pivoted (mounting kit 1)
s = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
d = Offset center
of emitting aperture h = Height of protective field
f = Alignment
11-4: Dimensional drawings and mechanical dimensions of C 2000
"cascadable" (sender, receiver mirror-inverted), small housing,
swivel mount, height of protective field S 1 = 150 ... 1200 mm
a = Clamp 180°, pivoted (mounting kit 1)
s = Plug M 12 x 1 (standard)
d = Offset center of emitting aperture
f = M 8 hexagon bolt to DIN 933 with washer to DIN 9021
(not supplied)
g = Sliding nut slot for side mounting
h = Alignment
Multibeam Photoelectric Safety Switch M 2000
g = Sliding nut slot for side mounting
j = Plug M 12 x 1 (standard)
g = Sliding nut slot for side mounting
j = Plug M 12 x 1 (standard)
j = Plug M 12 x 1 (standard)
© SICK AG • Safety Systems • Germany • All rights reserved
Operating Instructions
Safety Light Curtain C 2000