Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12
features
TIMER ON/OFF
The TIMER ON/OFF serves as an extra timer in the kitchen
that beeps when the set time has run out. It does not start
or stop cooking. The TIMER ON/OFF feature can be used
during any of the other oven control functions. The timers
can be operated independently of each other.
Setting the Timer
1. Set both Oven Mode knobs to the OFF position.
2. Press either the TIMER ON/OFF. 0:00 with
it appears and TIMER flashes in the display.
3. Turn the Time/Temp knob to set the desired time.
Turn the knob clockwise to increase the time and
counterclockwise to decrease the time.
note
If the TIMER ON/OFF is not pressed, the timer
returns to the time of day.
4. Press the TIMER ON/OFF to start the timer. The
display shows the set time counting down.
5. When the set time runs out End shows in the
display. The indicator tones sound every 15 seconds
until the TIMER ON/OFF is pressed.
6. To cancel the timer, press the TIMER ON/OFF once.
The display will return to the time of day.
note
If the remaining time is not shown in the display,
recall the remaining time by pressing the TIMER
ON/OFF.
- Press the TIMER ON/OFF once to set the time in
hours and minutes.
- Press the TIMER ON/OFF twice to set the time in
minutes and seconds.
CONVECTION AUTO CONVERSION
When cooking using the convection mode (Conv. Bake,
Conv. Roast, and Crisp Conv.), the oven temperature is
automatically reduced by 25°F(14°C). The display will
show the changed temperature.
This feature is called auto conversion. Your oven comes
with this feature enabled.
To disable the auto conversion feature, do the following:
1. Set both Oven Mode knobs to the OFF position.
2. Press and hold START TIME for 3 seconds. Then
inside
HR
press START TIME once. Auto appears in the display.
3. Turn the Time/Temp knob to enable or disable the
feature.
4. Press START to accept the change.
Publicidad
Tabla de contenido
