Removing And Replacing The Oven Door - Signature Kitchen Suite UPWS3044ST Manual Del Usuario

REMOVING AND REPLACING THE
OVEN DOOR
caution
• The door is very heavy. Be careful when removing
and lifting the door.
• DO NOT lift the door by the handle.
• DO NOT hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased risk
of breakage at a later time.
Removing the Oven Door
1. Fully open the door. Pull the hinge locks away from
the oven interior, until they are fully unlocked. A
tool, such as a small flat-blade screwdriver, may be
required.
Slot
Slot
Hinge
Hinge
lock
lock
Hinge
Hinge
arm
arm
Pull hinge locks down to unlock
2. Firmly grasp both sides of the door at the top. Close
the door to the removal position (approximately five
degrees from fully closed).
about 5˚
about 5˚
Removal Position
3. Lift the door up and out until the hinge arm is clear
of the slot. Put the door on the floor.
Lock
Lock
Unlock
Unlock
Replacing the Oven Door
1. Firmly grasp both sides of the door at the top.
Hinge arm
Hinge arm
2. With the door at the same angle as the removal
position, seat the indentation of the hinge arm into
the bottom edge of the hinge slot. The notch in the
hinge arm must be fully seated into the bottom of
the slot.
Push hinge locks up to lock
3. Fully open the door. If the door will not fully open,
the indentation is not seated correctly in the bottom
edge of the slot.
4. Push the hinge locks down toward the bottom of
the door to the locked position. Close the oven door.
maintenance
Bottom
edge of
Bottom
slot
edge of
Indentation
slot
Indentation
Hinge lock
Hinge lock
Hinge arm
Hinge arm
35