Input Specification - Mitsubishi a SIMPLE APPLICATION CONTROLLER Manual Del Usuario

α
Simple Application Controller
2.3

Input Specification

Table 2.3: AC Input Specifications
Input Voltage
Input Current
Input Impedance
ENG
OFF to ON/ ON to OFF
Response Time
Isolation Circuit
Operation Indication
Table 2.4: DC Input Specifications
Input Voltage
Input Current
OFF to ON/ ON to OFF
Response Time (I01 - I08)
Response Time (I09 - I12)
Isolation Circuit
Operation Indication
Note 1 - Current leakage from the sensors connected to the inputs might provide enough current to turn the
controller On. Do not use two wire sensors.
Description
100 - 240V AC~, +10% -15%, 50 - 60 Hz
0.24mA / 240V AC~, see Note 1
> 800 kOhms
80V/40V
~ 50ms
None
Liquid Crystal Display
Description Sink ("-" Common)
24V DC +20% -15%
5.0 mA / 24V DC
Current: > 4.3mA / < 1.1 mA
Voltage: < 4V / > 18V
10 - 20 ms
20 - 40 ms
None
Liquid Crystal Display
AC Input Specification
Source ("+" Common)
24V DC +20% -15%
5.0 mA / 24V DC
Voltage: > 18V / < 4V
10 - 20 ms
20 - 40 ms
None
Hardware Specification 2
6