Visor - SCHUBERTH R2 Manual Del Usario

C. THE HELMET
3. Pull the free end of the chin strap until it's
tight and comfortable on your chin.
4. Take the free end of the chin strap reverse
and affix to the press stud.
Loosing and opening
Release the press stud and pull on the red lug of
the double-D-fastener, so that the chin strap is
loosened.
Thread the free end of the chin strap out of the
double-D-fastener.
Caution:
Never ride without a closed and adjusted chin strap, otherwise you risk
losing the helmet from your head.

10. VISOR

The visor is a fog-free double-lens visor. By fixing the inner anti-fog lens using
eccentric pins, the two visor panes are pre-tensioned together and are thereby
sealed. An insulating air cushion is thus formed between the visor's main plate
– i.e. the outer plate – and the inner plate, which prevents any fogging up of
the inner plate.
COATING
The main visor has an anti-scratch coating.
Note:
The helmet should never be used to hold gloves or any other objects as
this may damage the scratch-sensitive anti-fog lens.
46