Inner Lining; Ventilation - SCHUBERTH R2 Manual Del Usario

Note:
The face shield should not be completely closed when not in use
(particularly during periods of storage), as the moisture contained on the
inside cannot escape if closed and will largely be absorbed by the anti-fog/
anti-scratch coating. This can lead to a reduction in the lifespan of the
coating. Ideally, position the face shield in the third locking setting above
the urban position.
Note:
Do not attach labels, tape or stickers to the visor.

3. INNER LINING

The inner lining of the R2 can be removed completely. The head and cheek
pads can be washed by hand using a mild soap solution (e.g. with highly diluted
standard mild detergent) at a maximum temperature of 30 °C. Allow the lining
to dry at room temperature and with good ventilation.

4. VENTILATION

VENTILATION COWL
When necessary, the head ventilation system's air inlet cowl can be removed to
clean the ventilation mechanism.
1. To do this, press down hard on the ventilation
slider from behind and hold it lightly under the
front until it comes off the ventilation hood.
EN
65