Maintenance - ELICA EPT436SS Guía De Instalación, Uso Y Mantenimiento

•
valid clock times are from 1:00 to 12:59.
•
key for 5 seconds, and after, the clock can be adjusted
clock programming mode.
•
for more than 1 second, the increments / decrements will
be of 5 minutes. During this option the control will
round to the nearest 5 minutes.
•
•
the programmed clock time and will add one minute
to the set clock.
•
required to be washed.
•
normal display operation.
•
installed are required to be replaced or reactivated.
•
the normal display operation.
Audible signal activation and deactivation
•
• If the audible signal is activated, a tone must sound and
•
appear on the display for 2 second and no sound must sound.
•
•
•
alarm is disabled.
Heat sensor
•
on the blower at second speed if excessive heat
•
blower will be set automatically to second speed.
• During this state, the user may raise the blower speed to
third speed but can not decrease the speed.
• When the temperature level on the hood drops to normal,
before the alarm occured.
operating / used.
To remove:
•
•
To replace:
•
•
•
top and release the pivot.
To clean:
•
water or wash it in the dish washer.
• Do not use abrasive cleaners.
Hood maintenance
• Clean with a damp, soapy cloth and dry with a clean cloth.
• Do not use a steel wool pad; it will scratch the surface.
•
the surface in the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel surface.
11
-