Electrical & Installation Requirements; Electrical Requirements; Before Installing The Hood - ELICA EPT436SS Guía De Instalación, Uso Y Mantenimiento

Electrical & Installation requirements

Electrical requirements

IMPORTANT
It is the customer's responsibility:
Electrical Code, Part 1 and C22.2 No.0-M91 - latest
edition** and all local codes and ordinances.
If codes permit and a separate ground wire is used, it is
ground path is adequate.
Do not ground to a gas pipe.
hood is properly grounded.
Do not have a fuse in the neutral or ground circuit.
IMPORTANT
Save Installation Instructions for electrical inspector's use.
conduit.
Standards C22.1-94, Canadian Electrical Code Part 1 and
C22.2 No. 0-M91 - latest edition** and all local codes and
ordinances.
Copies of the standards listed may be obtained from:
Massachusetts 02269
Electric requirements
•
and connected to an individual, properly grounded
breaker or fuse.
• Wiring must be two wire with ground.
• If the electrical supply does not meet above requirements,
call a licensed electrician before proceeding.
• Route house wiring as close to the installation location as
possible, in the ceiling or back wall.
•
accordance with the local codes.

Before installing the hood

1.
or as few elbows as possible.
CAUTION
:
2.
3. Fittings material is provided to secure the hood to most
4.
5.
conduction of outside temperatures as part of the
the thermal break.
ducting enters the heated portion of the house.
6.
area.
4