Technical Data - CRESTO RESQ RED PRO Mk I Manual De Instrucciones

2. TECHNICAL DATA

NOTE: Essential data from the following certification specifications is displayed on every de-
vice ID sticker, on its front cover with references to the supplier, certification and limitations
in use, as well as traceability, shown on the bottom picture page 8. This sticker must remain
readable and if not it must be changed.
Manufacturer:
Product:
Type:
Line:
Certification:
Max. descend height:
Max. descend load:
Min. descend load:
Max. ambient temperature:
Min. ambient temperature:
Max. lifting capacity:
Max. hoisting height:
Producer tested loads:
Max. height/load descending:
Max. height/load descending:
Descent velocity:
Calculation of descend energy:
4 |
CRESTO AB, Sweden
Emergency descender device with hoisting function
RED Pro Mk I
Alpine sheathed core rope Ø 9 mm and Ø 10.5 mm
EN 1891:1998
Weight: 61g/m (Ø 9mm) / 71,5 g/m (Ø 10.5 MM)
Elongation: 4,2 % (Ø 9 mm) / 3 % (Ø 10.5 mm)
Material: Polyamide/Polyamide
EN 341:2011/A (100 kg) / 1B (200 kg)
EN 1496:2006 Class B
CSA Z259.2.3-12, type 1A (100 kg), type 1B (200 kg)
160 m
200 kg
50 kg
+ 60 °C
- 40 °C
136 kg
12 m
48 x 160 m with max. load 100 kg
5 x 160 m with max. load 200 kg
0,8 m/s at loads up to 100 kg. Increasing
speed is to be expected as load is increased
to max. 200 kg (max. 2 m/sec.)
W = m x g x h x n
m = descend load (kg), g = acc. of free fall
(9,81 m/s ) h = descend height (m), n = number
2
of descents Class A W = 7,5 x 10
Class B W = 1,5 x 10
© CRESTO AB 2016 | UK Master vers. 2016 - 1 | Rev. 21.06.2017
J /
6
J
6