Use - CRESTO RESQ RED PRO Mk I Manual De Instrucciones

3 USE

The lowering speed of approx. 0.8 m/s, depending on load, supports a safe descent. The
equipment should be accessible as "unit equipment" at relevant locations or brought on site
as "mobile equipment" for fitters, etc.
In cases where twin lowering is needed, weights of different evacuees should be
combined in ways to minimise the combined max. Load as much as possible.
If necessary, the equipment may also be used to lift/hoist people in emergency situations
before they can be freed from the actual structure.
The equipment must only be used for rescue and evacuation and not as fall arrest equip-
ment or as a utility "crane".
The equipment may only be connected with approved PPE components cf. EN, ANSI or
CSA. This must always be in accordance with the individual national regulations and local
requirements.
NOTE
If the process of combining PPE equipment, accessories (e.g. karabiner hooks) and rescue
equipment into different rescue and/or evacuation solutions, it is most important to observe
fully functional and safe solutions in the use of different approved components, as recom-
mended by the producer, during mandatory training and/or repetition.
Failing to execute the use of the rescue equipment as recommended, may compro-
mise safety and endanger both users as well as evacuees.
| 5
© CRESTO AB 2016 | UK Master vers. 2016 - 1 | Rev. 21.06.2017