Blodgett SG2136 Manual De Instrucciones página 28

Operation
Programmable Menu Control
MENU PROGRAMMING
NOTE: The following example is in
will read C if programmed in celsius.
_
To enter programming mode:
1. With the oven off, press and hold the UP
ARROW key (3) and the ENTER/RESET key
(5) simultaneously for approximately three
seconds.
The display reads:
2. Press and hold the UP ARROW key (3) until
the bottom line of the display reads 111 (the
store access code).
3. Press the ENTER/RESET key (5) to enter the
programming mode.
To program the menu keys:
1. The display reads:
2. Press the MENU key (4) to be programmed.
NOTE: For this example we will program
menu key 1.
3. The display reads:
Use the ARROW keys (3) to scroll to the de-
sired cook temperature.
Press the ENTER key (5) to store the new cook
temperature.
4. The display reads:
Use the ARROW keys (3) to scroll to the de-
sired cook time.
Press the ENTER key (5) to store the new cook
time.
5. The display flashes:
F. The display
_
ACCESS CODE
000
SELECT MENU KEY
MENU 1, 2, 3, OR 4
MENU-1 SELECT TEMP
XXXF PRESS ENTER
MENU-1 COOK TIME
XX:XX PRESS ENTER
MENU-1
PROGRAM DONE
To exit the programming mode:
1. Press and hold the UP ARROW key (3) and
the ENTER/RESET key (5) simultaneously for
approximately three seconds.
NOTE: If no key is pressed for 60 seconds, the con-
trol automatically exits the program mode.
OPERATION
1. Press the OVEN ON/OFF key (2). The control
defaults to the last time and temperature set-
tings used.
The display reads:
NOTE: HEAT appears in the top line of the dis-
play whenever the control calls for heat.
2. Press the desired MENU key (4).
3. The fans begin to run. The conveyor belt be-
gins to travel at the set cook time. The heat
rises to the setpoint temperature.
4. When the oven reaches the set temperature,
READY and SET TEMP flash alternately in the
top line of the display and an audible alarm
sounds. The conveyor belt begins to travel at
the set cook time. The heat rises to the set-
point temperature.
NOTE: To change the cook time and temperature
press any of the other menu keys.
To display the actual oven temperature:
1. Press both ARROW keys (4) .
The display reads:
2. Press the down arrow key to return the display
to the setpoint time and temperature.
To turn the oven off:
1. Press the OVEN ON/OFF key (2). The oven is
equipped with a cool-down feature for motor
shaft and bearing protection. This enables the
blower motor(s) to run regardless of the con-
troller status. The blower(s) continue to run
until the oven cools to a safe temperature.
26
M-X TEMP XXXF HEAT
COOK TIME XX:XX
XXXF
DOWN --- EXIT