Installation Instructions - Westfalia 313 140 Ausf. A Manual De Instrucciones

Note 4: The following components are optional for this trailer bracket:
1.) Ball plate, model 329 050 (normal position of ball central point)
2.) Ball plate, model 329 061/329 062 (approx. 40 mm lower than for 329 050)
3.) Ball plate, model 329 042 (four-wheel drive)
4.) Shackle-type towing device, model 243 U 115 EL
Ball plate and automatic shackle-type towing device can also be mounted in
conjunction with a towing device quick-change system.
Scope of delivery of trailer bracket:
Item Designation
1 Trailer bracket
2 Support
3 Counter-piece
4 Fishplate
5 Spacer pipe
6 Hexagon bolt M12x1,5x100, strength class 10.9
7 Hexagon bolt M10x90, strength class 10.9
8 Hexagon bolt M10x35, strength class 10.9
9 Hexagon bolt M10x30, strength class 10.9
10 Collar nut M10, strength class 10
11 Hexagon nut M10, strength class 10
12 Hexagon nut M12x1,5, strength class 10
13 Washer 13x24x2,5
14

Installation instructions

Available spare parts for trailer bracket
Spare part no.
913 149 650 001
913 137 619 001
Installation Instructions:
1.) Unscrew towing eye. Towing eye is not needed. Remove spare wheel from holder.
Detach/remove exhaust system as necessary.
2.) Hold trailer bracket 1 under vehicle and align at "a" with bores on vehicle. Insert hexagon bolts
M12 with washers 13 at "a", fit counter-pieces 3 and loosely secure with washers 13 and
hexagon nuts M12.
3.) Position supports 2 (ensure correct positions on left and right) at "b" on trailer bracket 1, insert
hexagon bolts M10x30 and loosely secure with securing nuts M10.
4.) Align supports 2 and position on vehicle frame side member (inner). Ensure dimension 25 mm
(see section A-A). Mark vehicle frame side member (inner) at "c". Remove supports 2 at "b".
5.) Mark centre of vehicle frame side member (inner) at "c". Drill holes (10,5 mm dia.) in vehicle
frame side member inner and outer struts. (Ensure correct angle). Drill outer strut of vehicle
frame side member to 18,5 mm. Deburr bores (see section A-A).
Designation
Pack of mounting parts (items 3-14)
Pack of Support (items 2)
Number
1
2
2
2
4
8
4
4
4
2
8
8
16
1
23