Setting The Audio Music System - KBL megaSun 5600 Manual De Instrucciones

FILLING LEVEL OF AROMA GEL
The fi lling level of the Aroma gel container is indicated
under the menu item
AAC
1. Invoke the
2. Press START twice to open the submenu and
select AR.CONT by pressing 5 (plus button) or 0
(minus button).
3. If necessary, press 1 to acknowledge the
replacement of the Aroma tin.
4. Exit the menu using the STOP button.
Setting the audio music
system
④[⑤]
STANDARD AUDIO SOURCE
AUDIO/PRESEL
The menu item
mine which audio source is selected as the default
source when the tanning session is started. Only
sources that are activated under
lected.
AUDIO
1. Invoke the
2. Press START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select
3. Preselect the desired source by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
ACTIVATING/DEACTIVATING AUDIO SOURCES
AUDIO/WPS
The menu item
which audio sources are to be made available to the
salon client. W=Wellness, P=Pop, S=Studio Music.
In the case of a top mark (apostrophe:
responding source is activated while it is deactivated
if a bottom mark is shown (comma:
sources are listed under
AUDIO
1. Invoke the
2. Use START to invoke the submenu and 5 (plus
button) or 0 (minus button) to select
Set the desired value by using the plus and minus
buttons to the corresponding letters.
3. Press START to save the settings and leave the
32
M a n u a l d e i n s t r u c c i o n e s | megaSun 5600
AAC/AROMA/AR.CONT
menu.
④
is used to deter-
WPS
can be se-
menu.
is used to determine
), the cor-
). All activated
AUDIO/PRESEL
.
menu.
PRESEL
menu by pressing STOP.
MUSIC VOLUME IN TANNING MODE
. The menu item
determine the volume of the music during a tanning
session. The maximum possible volume of the unit
is at 100 %.
1. Invoke the AUDIO menu.
2. Use START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select VOL.
HOT.
3. Set the desired percentage by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
MUSIC VOLUME IN STANDBY MODE
Use the menu item
whether music is also played during standby
operation (ON) or not (OFF).
1. Invoke the
2. Use START to invoke the submenu and 5 (plus
button) or 0 (minus button) to select
WPS
.
NONSTOP ON
3. Set
NONSTOP OFF
4. Press START to save the settings, and leave the
menu by pressing STOP.
VOLUME OF EASYCARE
④
Select the menu item
set the volume of the easyCare unit. The maximum
possible volume of this unit is 100 %.
1. Invoke the
2. Press START to open the submenu and select
VOL.EC
button).
3. Set the desired percentage using 4 (plus button)
or 9 (minus button).
4. Press the START button to save the settings and
.
then press STOP to exit the menu.
AUDIO/VOL.HOT
is used in order to
AUDIO/NONSTOP
AUDIO
menu.
by pressing 4 (plus button) or
by pressing 9 (minus button).
④
AUDIO/VOL.EC
AUDIO
menu.
by pressing 5 (plus button) or 0 (minus
④
④
to determine
NONSTOP
.
in order to