Operation Using Different Audio Sources - KBL megaSun 5600 Manual De Instrucciones

Operation using different
audio sources
The tanning unit can be operated using the following
audio sources:
•
An internal MP3 player alone
•
An external audio source alone
•
Both audio sources
Use the control panel to alternate between internal
and external audio source.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks on
the SD card.
EXTERNAL AUDIO SOURCES
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
•
the studio music, and
•
external players such as MP3 players, mobile
phones (cell phones), iPods, etc.
EXTERNAL AUDIO SIGNAL 100 V
(OPTIONAL FEATURE)
A transformer (KBL item no.: 9100 0170 00) is re-
quired for the transmission of the audio signal if a
100 V audio system is connected.
The connection must be carried out by trained ser-
vice staff.
Studio music
The level of the studio music can be adjusted by
means of a potentiometer on the line box. The box is
located below the bed, on the right-hand front side
(fi gure 9.1)
It is only fi xed by Velcro tape and can be removed.
Figure 9.1
The potentiometer is located on the rear side of the
box . This is where you can adjust the studio
(fi gure 9.2)
music to the level of the integrated MP3 player.
Figure 9.2
M a n u a l d e i n s t r u c c i o n e s | megaSun 5600
9