Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PIN II
1. Invoke the
menu and enter the PIN.
2. Press START to invoke
EINSTELLEN (SET OPERATING HOURS OF
TUBES)
.
3. Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
4. Save the settings by pressing START and exit the
menu using the STOP button.
Download information
PIN II/la.Download
The menu items
II/fi.Download
indicate time and date of the latest
la.Download)
(
or of the fi rst (
software download.
PIN II
1. Invoke the
menu and enter the PIN.
la.Download
2. Select
pressing 5 (plus button) or 0 (minus button).
3. Press
the
START
corresponding information.
Settings aquaCool (on/off)
PIN II/AQ
The menu item
aquaCool function (top mark) or to deactivate it
(bottom mark). If the function has been deactivated,
the aquaCool symbol is not displayed, and the studio
customer cannot activate aquaCool.
PIN II
1. Invoke the
menu and enter the PIN.
AQ
2. Select
using 5 (plus button) or 0 (minus
button).
3. Activate the function by pressing 4 (plus button)
and deactivate it by pressing 9 (minus button).
4. Save the settings by pressing START and exit the
menu by pressing the STOP button.
Aroma/Aqua test
AROMA / AQUACOOL TEST CYCLE
PIN II/TEST
Under the menu item
AROMATEST
AQUATEST
and the
PIN II
1. Invoke the
menu and enter the PIN.
2. Press 5 (plus button) or 0 (minus button) to select
TEST
.
RÖHRENSTUNDEN
④
PIN
and
fi.Download)
fi.Download
or
button
to
display
the
④
is used to activate the
④
you can start the
.
3. Press the START button to invoke the submenu
and 5 (plus button) or 0 (minus button) to select
AROMATEST
4. Press START to activate the test cycle.
AQUACOOL ENDURANCE TEST
Under the menu item
you can determine whether an aquaCool endurance
test is to be started with the subsequent tanning ses-
sion. This test has a cycle time of 5 minutes and
covers the whole of the tanning time.
PIN II
1. Invoke the
2. Press 5 (plus button) or 0 (minus button) to select
TEST
.
3. Press the START button to invoke the submenu
and 5 (plus button) or 0 (minus button) to select
by
AQUA EXTR.
AQUA EXTR. ON
4. Select
AQUA EXTR. OFF
ton) or
button).
Querying software info
Select the menu item
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
PIN II
1. Invoke the
2. Press 5 (plus button) or 0 (minus button) to select
VERSION
.
3. Press START to display the version information.
Setting the easyCare unit
The menu items concerning easyCare are only dis-
played if the tanning system is equipped with an
easyCare unit. For information other than the menu
setting, please refer to the easyCare manual.
DEFAULT SESSION TIME EASYCARE
The session time set here is used whenever
easyCare is activated without allowing for mak-
ing
settings
(T.Display = OFF).
M a n u a l d e i n s t r u c c i o n e s | megaSun 5600
AQUATEST
or
.
PIN II/TEST/AQUA EXTR.
menu and enter the PIN.
by pressing 4 (plus but-
by pressing 9 (minus
PIN II/VERSION
menu and enter the PIN.
via
the
easyCare
display
④
to display
④
itself
35
Publicidad
Tabla de contenido
