Disposal Of Packaging And Product; Spare Parts - Xylem LOWARA ESH ATEX Serie Manual De Instalación, Uso Y Mantenimiento

Special symbols
Some hazard categories have specific symbols,
as shown in the following table.
Electrical hazard Magnetic hazard
Electrical
hazard:
Hot surface hazard
Hot surface hazards are indicated by a
specific symbol that replaces the typical
hazard level symbols:
ATTENTION:
Description of user and installer symbols
Specific information for personnel
responsible for the installation of the
product within the system (hydraulic
and/or electric system), and for
maintenance operations.
Specific information for users of the
product.
1.3 Disposal of packaging and
product
Observe the local regulations and codes in
force regarding sorted waste disposal.
1.4 Warranty
Refer to the contractual sales documents for
information on the warranty.
1.5

Spare parts

WARNING:
• Repair and/or maintenance of the
pump must only be carried out by
Xylem or the Authorised
Distributor.
• Repair and/or maintenance
carried out by unauthorised
companies could lead to
malfunctioning, damage to
property and physical injury, and
render the warranty null and void.
ATTENTION:
Always cite the type and code of the
product when contacting Xylem or the
Authorised Distributor to request
technical information.
ATTENTION:
1.6 DECLARATIONS
1.6.1 EC Declaration of Conformity
(original)
Xylem Service Italia S.r.l., with headquarters in
Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the
product
Pump unit (see label on first page)
fulfils the relevant provisions of the following
European Directives:
•
Machinery 2006/42/EC and subsequent
amendments (ANNEX II - natural or legal
person authorised to compile the
technical file: Xylem Service Italia S.r.l.)
•
Eco-design 2009/125/EC and subsequent
amendments, Regulation (EU) no.
547/2012 (water pump) if MEI marked
and the following technical standards:
•
EN ISO 12100:2010, EN
809:1998+A1:2009, EN 60204-
1:2006+A1:2009.
Montecchio Maggiore, 30.09.2019
Amedeo Valente
(Director of Engineering
and R&D)
rev.00
EU Declaration of Conformity (n. 03)
1. (ATEX-EMCD) Apparatus/Product model:
(see label on first page)
(RoHS) Unique EEA identification: N.
ESH-EX2
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3. This declaration of conformity is issued
under the sole responsibility of the
manufacturer.
en - Original instructions
19