Viewing Each Sensor'S Status; Dealing With A Sensor False Alarm - Nortek Security & Control 2GIG e Serie Guia Del Usuario

GC2e Wireless Security System | User Guide

VIEWING EACH SENSOR'S STATUS

The Control Panel will also show you which sensor-protected doors and windows are open. Your installer has
programmed descriptive names for each sensor-protected door and window. The Control Panel's color display will show
the names of which doors and windows are open.
● The top of the display on the Home, Security, and Menu screens shows sensor status. See "System Status Icons" on
page 23. Tapping the Status button also displays a list of open sensors and general system status and alerts.
A
D
A
The Status Bar shows the system mode and shows system status icons. See "System Status Icons" on
The Arm button on the Security and Menu screens lights green when all perimeter sensors are closed. The Arm
B
button lights orange if any perimeter sensor is open.
The Home button lights blue when all perimeter sensors are closed. The Home button is not lit if any perimeter
C
sensor is open.
The icon displayed shows that an interior sensor is open. Other icons can appear here as well. See "System
D
Status Icons" on

DEALING WITH A SENSOR FALSE ALARM

When armed, the Control Panel reports alarm conditions on all sensors, both visually (on the status bar, and
through a system alert icon) and audibly (through voice and chime announcements). There are rare times
when an sensor will send a false alarm condition to the Control Panel. The conditions of a false alarm vary
depending on the type of sensor and how that sensor communicates with the Control Panel.
● Perform a System, Sensor, and Panel Test to find any false alarm conditions. See "System Test" on
page 29. See "Sensor Test" on
page 23.
page 29. See "Panel Test" on page 30.
10
Burglary Protection
page 23.
Copyright © 2019 Nortek Security & Control
B
C