System History; System Test - Nortek Security & Control 2GIG e Serie Guia Del Usuario

GC2e Wireless Security System | User Guide
While Disarmed
You can also use the secret duress button while the system
is disarmed. Tapping the system logo reveals the Enter
Code screen. Enter the duress code to send a silent duress
report to the Central Station and they will dispatch help.
The system remains disarmed. If supported by the 2GIG
Alarm dealer, the left side of this screen also displays
contact information for the alarm dealer or Central Station.

SYSTEM HISTORY

The Control Panel keeps a log of system events in the
order in which they occur. Each event is marked with the
date and time that the event occurred.
To make reading the log easier, the system history display
can be filtered to show selected events only. The events
that can be filtered for the system history log display are:
● Arm/disarm of the system
● Bypasses of sensors (force bypasses and manual
bypasses)
● Alarms (alarms are displayed with a red stripe)
● Alerts (alerts are displayed with a yellow stripe)
Some system events always display regardless of the filters
selected. These events include:
● Walk test started or terminated
● Programming mode started or terminated
To view the system history log:
1 At the Home screen, tap Security.
2 At the Security screen, tap Menu.
3 On the Menu screen, tap Toolbox.
4 Enter a valid user code to access the toolbox.
5 At the Toolbox (1 of 3) screen, tap System History. The
log of system events appears. Use the  and  arrows
to scroll through the log.
6 To choose the events to display, tap Filters.
7 Select the events to display with the check boxes. Tap
All to select all the check boxes, or None to clear all
the check boxes.
8 Tap OK when finished.

SYSTEM TEST

Even though your security system is self-monitoring, it
is still important to regularly test the system manually.
The System Test is used to test each of the sensors in
the system. The master user code is required to test the
system. While the system is in test mode, a "T" icon blinks
on the upper right of the display.
IMPORTANT: Test your Security System weekly to ensure
continued protection and proper system operation.
To test the system:
1 At the Home screen, tap Security.
2 At the Security screen, tap Menu.
3 At the Menu screen, tap Toolbox.
4 To access the system test, enter the master user code.
5 At the Toolbox (1 of 3) screen, tap System Test.
29
System Toolbox
Copyright © 2019 Nortek Security & Control