Emergency Functions; 24-Hour Emergency Buttons; Panic; Fire - Nortek Security & Control 2GIG e Serie Guia Del Usuario

GC2e Wireless Security System | User Guide

EMERGENCY FUNCTIONS

24-HOUR EMERGENCY BUTTONS

Three 24-hour emergency functions are available on the Control Panel:
● Panic
● Fire
● Emergency
You can activate emergency functions using the Control Panel, as well as wireless sensors, wireless keypads or portable
pendant devices such as the panic button remote.
Tap the button to reveal the Emergency screen. This button does not trigger an alarm. During the installation, your
installer programmed the emergency buttons that are displayed on the Emergency screen. If, however, no emergency
functions are available, an information screen displays. To see which emergency functions are available on your system,
tap the button.
In the event of an emergency, press and hold the Emergency button for at least two (2) seconds to activate the alarm.
A
If emergency functions are available, the Emergency button is a solid white lighted button.
B
To display the Emergency screen, press the Emergency button.
C
The Emergency screen.
D
The Emergency screen displays the emergency options that are available on your system.

Panic

The Panic (or police) button sends an immediate panic report to the Central Station. During installation, the installer either
set the system to sound the siren when the button is pressed, or to not sound the siren, but to trigger a silent alarm.

Fire

The Fire button sends an immediate fire report to the Central Station. The Control Panel sounds the fire horn when the
button is pressed.

Emergency

The Emergency button sends an immediate report to the Central Station. The Control Panel sounds the siren when the
emergency button is pressed.
C D
A B
21
Copyright © 2019 Nortek Security & Control