Fulgor Milano CREATIVE CCSO 4511 TC Manual Del Usario página 70

REPLACING THE OVEN LAMP
IMPORTANT:
The oven lamp must have precise characteristics:
GB
a) Structure suitable for high temperatures (up to 300 °C);
b) Power supply: see the V/Hz value on the serial number plate;
c) power 25 W;
d) Type G9 connector.
Attention: make sure the appliance is off before replacing the lamp to avoid the possibility of
electric shock.
- To avoid damage, spread a tea towel for pots and pans inside the oven;
- Remove the screws holding the steel frame;
- Remove the old lamp by sliding it out of its seat and taking care not to break it;
- Insert the new bulb taking care not to touch it with your hands (we recommend using a disposable
latex glove);
- Replace the stainless steel frame taking care not to pinch the silicone gasket seal;
- Screw in the stainless steel screws you previously removed
- Connect the appliance to the power line.
70