Publicidad
Idiomas disponibles
Idiomas disponibles
Choose a good, cleared assembly
area and get a friend to help you
put your smoker together. Lay
cardboard down to protect smoker
finish and assembly area.
CAUTION: Some parts may
contain sharp
edges. Wear
protective gloves if
necessary.
Note: With the help of a friend,
turn the smoker cabinet
upside down.
Step 1
For each leg, line up the holes of
cabinet and insert the three
M6 x 12mm bolts front inside the
cabinet and secure with M6 nuts
as shown. Repeat for all four legs.
Note: Front legs will have a hole
near top of the leg for
mounting the control panel.
Step 2
Set the burner assembly onto the
cabinet as shown.
Step 3
Secure the burner assembly with
the three M6 x 12mm bolts from
the inside of the cabinet. Securely
tighten the bolts.
18
Publicidad
