Final Assembly; Programming - Metra 99-5849CH Instrucciones De Instalación

PROGRAMMING

1. Open the driver's door, and keep open during the programming process.
2. Cycle the ignition on and wait until the climate control lights turn blue.
Note: If the lights don't turn blue, unplug port C from the touchscreen for a few seconds,
then try again.
3. Test all functions of the installation for proper operation, before reassembling the dash.

FINAL ASSEMBLY

1. Secure the completed assembly into the upper dash using the factory hardware removed in
Dash Disassembly, step 5.
2. Snap the radio trim panel over the completed assembly, then reassemble the dash in reverse
order of disassembly to complete the installation.
REV. 9/27/2019 INST99-5849CH
11