INSTALLING CHILD RESTRAINT
WITH LAP BELT
6.
Route vehicle belt up through vehicle belt
6
path opening on side of Base, through
Belt Guide, under Belt Tensioner, through
opposite Belt Guide, and down through
opposite belt path opening. BUCKLE THE
BELT. Make sure belts are underneath tabs
on belt guide and lie flat without twisting.
NEVER install this Child Restraint using a
non-locking vehicle lap belt (page 26).
NEVER place vehicle belt over Belt
Tensioner, even in a vehicle with longer
buckle stalks. This will prevent proper
operation of the Child Restraint.
81