CYBEX gold SIRONA S Manual Del Propietário página 84

9. Grab Base near belt path and pull side to side
and front to back to make sure Base is installed
tightly. Base should not move more than 2.5 cm
(1 in) side to side or front to back at the Belt
Path on the Child Restraint.
If Base moves too much, open Belt Tensioner,
tension vehicle belt a little more and try again.
After this, if Base still moves too much, you may
need to try a different vehicle seat location or
installation method, or both.
84
INSTALLING CHILD RESTRAINT
WITH LAP BELT
9