Impact Absorbing Chest Pads - Britax MARATHON CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.
5. Replace the cover,
ensuring the seat cover
is tucked behind the
CLICKTIGHT bar, then
close the CLICKTIGHT.

Impact Absorbing Chest Pads

IMPORTANT:
recommended for forward-facing mode. Removal of chest
pads is optional for rear-facing mode to ensure a snug fit
for small infants.
Removing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness
release button.
b. Pull both harness
straps forward.
2. Adjust the harness to
the lowest position and
unhook the harness
straps from the yoke at
the back of the child seat.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad,
chest pad, and the chest
clip.
5. Reroute the harness strap
back through the chest
clip and comfort pad,
ensuring that the harness
strap is not twisted.
6. Repeat for other strap.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass over
the tube.
40
Impact absorbing chest pads are highly
1b
1a
TUBE