Use And Maintenance; Technical Data; Identification; Handling - GASPARDO SARA Empleo Y Mantenimiento

ENGLISH

1.3 TECHNICAL DATA

Toolbar width
Toolbar width (closed) (road transport)
Max row number
Row distance
Seed hopper capacity
Fertilizer capacity
PTO (rpm)
Power required
Weight (*)
Tyres
No-load noise detection
Tractor hydraulic distributors
(*) With fertilizer and microgranulator.
The technical data and the models provided must be considered as non binding.
We reserve the right to change them without notice.

1.4 IDENTIFICATION

Each single piece of equipment, is equipped with an
identification plate (15 Fig. 2), which bears:
- CE Mark
- Manufacturers mark;
- Name, company name and address of the Manufacturer;
- Type of machine;
- Registration of the machine;
- Year of manufacture
- Mass, in Kilograms.
This information must always be quoted whenever assistance
or spare parts are required.
fig. 1
B
B C
34

USE AND MAINTENANCE

U.M.
m
m (feet)
cm
g.p.m.
HP
Kg
(bar-Psi) max.
Lpam (A) - Lwa (A)
Nr.
A
C
B
g
(feet)
nr.
(inch)
l
l
(Kw)
(lb)

1.5 HANDLING

If the machine has to be handled, it should be lifted by hooking
cloth ropes to the attachment points provided and using a suitable
hoist or crane with sufficient capacity (Fig. 1). Because of the
danger involved, this operation should be carried out by trained
and responsible personnel. The mass of the machine is on the
identification Plate (15 Fig. 2).
Stretch the rope to keep the machine level.
The hook points can be detected by finding the "hook" symbol
(fig. 3). For machines of up to four rows, hook up at points: A, C
and D. For machines of more than 4 rows hook up at points: A, B,
C, D and E.
SARA 250
4,00 (13)
2,55 (8)
6
70-75 (27-29)
32
650
540
80 (59)
1250 (2755)
20x8.00 - 10 (4 - 58)
92,3 - 109,7
min. 2
C
cod. G19502521
A