Threadlockers And Sealants - Wacker Neuson BS 50 Manual De Reparaciones

Ocultar thumbs Ver también para BS 50:
Tabla de contenido

Publicidad

Threadlockers and Sealants

TYPE
( ) = Europe
Loctite 222
Hernon 420
Omnifit 1150 (50M)
Hernon 423
Omnifit 1350 (100M)
Loctite 271/277
Hernon 427
Omnifit 1550 (220M)
Loctite 290
Hernon 431
Omnifit 1710 (230LL)
Loctite 609
Hernon 822
Omnifit 1730 (230L)
Loctite 545
Hernon 947
Omnifit 1150 (50M)
Loctite 592
Hernon 920
Omnifit 790
Loctite 515
Hernon 910
Omnifit 10
Loctite 496
Hernon 110
Omnifit Sicomet 7000
Threadlocking adhesives and sealants are specified throughout this
manual by a notation of "S" plus a number (S#) and should be used
where indicated. Threadlocking compounds normally break down at
temperatures above 175°C (350°F). If a screw or bolt is hard to
remove, heat it using a small propane torch to break down the sealant.
When applying sealants, follow instructions on container. The sealants
listed below are recommended for use on Wacker equipment.
COLOR
USAGE
Purple
Low strength, for locking threads smaller than 6 mm
(1/4").
Hand tool removable.
Temp. range, -54 to 149°C (-65 to 300°F)
Blue
Medium strength, for locking threads larger than
6 mm (1/4").
Hand tool removable.
Temp. range, -54 to 149°C (-65 to 300°F)
Red
High strength, for all threads up to 25 mm (1").
Heat parts before disassembly.
Temp. range, -54 to 149°C (-65 to 300°F)
Green
Medium to high strength, for locking preassembled
threads and for sealing weld porosity (wicking).
Gaps up to 0.13 mm (0.005")
Temp. range, -54 to 149°C (-65 to 300° F)
Green
Medium strength retaining compound for slip or press
fit of shafts, bearings, gears, pulleys, etc.
Gaps up to 0.13 mm (0.005")
Temp. range, -54 to 149°C (-65 to 300°F)
Brown
Hydraulic sealant
Temp. range, -54 to 149°C (-65 to 300°F)
White
Pipe sealant with Teflon for moderate pressures.
Temp. range, -54 to 149°C (-65 to 300°F)
Purple
Form-in-place gasket for flexible joints.
Fills gaps up to 1.3 mm (0.05")
Temp. range, -54 to 149°C (-65 to 300°F)
Clear
Instant adhesive for bonding rubber, metal and plas-
tics; general purpose.
For gaps up to 0.15 mm (0.006")
Read caution instructions before using.
Temp. range, -54 to 82°C (-65 to 180°F)
Threadlockers and Sealants
PART NO. -
SIZE
73287 - 10 ml
29311 - .5 ml
17380 - 50 ml
29312 - .5 ml
26685 - 10 ml
73285 - 50 ml
28824 - .5 ml
25316 - 10 ml
29314 - .5 ml
79356 - 50 ml
26695 - 6 ml
73289 - 50 ml
70735 - 50 ml
52676 - 1 oz.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bs 500Bs 60Bs 600Bs 70Bs 700Bs 65 ... Mostrar todo

Tabla de contenido