Scope - Trigger - Magneti Marelli FLEX TESTER Guía Rápida

Scope – Trigger
Auto/Normal/Single. These selections Allow you to acquire the signal in different way.
•
«Auto» means data is acquired in a continuous way.
•
«Normal» means data is acquired each time that the Trigger condition is verified
•
«Single» means data is acquired the first time that the Trigger condition is verified
Trigger Condition. Trigger condition selection is based on:
•
CH1/CH2 (to define when the event happens on)
•
When Normal is selected the SW shows a vertical and horizontal line. Move
the vertical line to the value that you want the signal to acquire and move the
horizontal line to the time that you want the signal to acquire. The color line
depends on the trigger channel selected
•
Up/down. Select Up if you want to start acquiring the signal when it
increases/decreases and passes through the vertical line
12