Features Available In Stand Alone Mode; Technical Features; Diagnosis; Scope - Magneti Marelli FLEX TESTER Guía Rápida

Features Available in Stand Alone Mode

Features Available:
•
Multimeter-Voltage. This feature displays the voltage measured (please use
channel 1)
•
Multimeter- Resistance. This feature displays the resistance measured (please use
channel 1)
•
Scope. This feature displays the electrical waveform of electrical signal (displayed
horizontally). Not available at this moment
•
OBD2. This feature displays parameter and DTC for OBD2. Not available at this
moment
•
Flight Recorder. This feature shows the status of flight recorder for scope and
multimeter. Not availableat this moment
PC. Start the PC software. When PC communicates with Flex the Flex screen shows «PC
CONTROL» and the arrows will indicate Diagnostic or Scope/Multimeter communication.
• Size: 1.5''x 3.9'' x 5.9''.
•
Weight: 12oz
•
IP54. Anti-shock protection integrated (rubber overmolded)
•
Operating Temperature: 0 - 140°F
• LCD 320x240 TFT 300cd/m2 - 2.8''
•
Usb/Wi-fi/Bluetooth built-in
•
Keyboard 7 button
•
Power Supply
•
Internal Lithium battery 7.4V-1000mA/h
•
Galvanic insulation PC-Scope

Diagnosis

•
1GB built in flash memory for flight recorder
•
Full electronic EOBD2 multiplexer
•
Protocol supported: Pulse code, KL-ISO9141, K-ISO14230, J1850VPW,
J18050PWM, CAN low/ high speed, RS485,ISO 15765, SAE J2610, SO11992,
SAE J2740, SAE J2411,SAE J1939, ISO 11992, RS232. J2534-2 PASS-
THROUGH compliant.

Scope

•
Vertical resolution: 13 bits
•
Channels 2
•
Bandwith 20 MHz
•
Sensiivity: 10mV/div to 20V/div
•
Input Ranges: ±100 mV/div to ±200 V/div
•
Overload protection: ±200V on single input
•
Sample rate/channel: 100MS/s
•
Buffery Memory: RAM 64MByte
•
Timebase range: 100 ns/div to 10 s/div
•
Multimeter and resistance: vertical resolution 16bit
T e c h n i c a l F
T e c h n i c a l F
e a t u r e s
e a t u r e s
26