Scope - Probe Selection - Magneti Marelli FLEX TESTER Guía Rápida

Scope – Probe Selection
Flex is available with a complete range of probes for Automotive acquisition
Probe Selection
In «CH1 Settings» and «CH2 Settings» it is possible to select the probe to use. Default is
«standard probe».
1. Standard Probe. Use Red cable for ch1 and blue cable for ch2. Into ground cable
of red cable there is a fuse to avoid damage due to accidental connection because
of the different voltage of the two cables. Standard probe can be used with a lot of
specific terminal probes to access the proper way to the electrical signal
FFT, amplitude and frequency
17