Ec Declaration Of Conformity - Brill RazorCut LION 38 Instrucciones De Uso

– It is essential that the product has been maintained
and cleaned according to the information in the opera-
ting instructions. No attempt to disassemble or repair
the product has been made by either the buyer or an
unauthorised third party.
– It must be ensured that only original replacement
parts and original accessories approved by the manu-
facturer are used. There may be an increased risk of
consequential damage and accidents if non-original
parts or non-original accessories are used. This warran-
ty does not cover consequential damages.
– The product must be either taken directly or sent with
postage paid to an authorised service centre.
– The original receipt must be sent with the product.
– The warranty does not cover damage from misuse,
abuse, use of unsuitable, non-original or unauthorised
interchangeable parts, replacement parts or accesso-
ries, as well as improper maintenance and cleaning.
The products contain various components that are sub-
ject to normal or use-related wear. The warranty does
not extend to these wearing parts.
In particular the following components relating to this
product are excluded: Blades / blade bar / drive belt /
care roller / blade roller / lower blade / cutting plate /
cutting line / cutting head cover / saw blade / nickel /
cadmium-cell (battery) / Lithium-Ion battery / brush /
aerator cylinder.
The manufacturer warranty does not affect existing war-
ranty claims between the customer and the dealer / seller.
Declaration of Conformity
EC Declaration of Conformity, Machinery Directive
(9. GSGVO) / EMVG / Low volt. Dir.
Brill Gloria
Haus- und Gartengeräte GmbH
Postfach 31 61
D-58422 Witten
hereby certifies that, when leaving our factory, the unit
indicated below is in accordance with the harmonised EC
guidelines, EC standards of safety and product specific
standards.
Any modification made to the unit without our consent
shall render this declaration null and void.
Description of unit :
- Battery powered cylinder mower
- RazorCut LION 38
- Art. No. – 65082
Hand-arm vibration is typically lower than 2,5 m/s
32
EC directives
Machinery directive 98/37EC
Electromagnetic compatibility directive 89/336 EC
Directive 93/68 EC
Directive 2000/14 EC
Harmonised EN
DIN EN ISO 12100-1
DIN EN ISO 12100-2
EN 836
EN 6100-3-2
EN 6100-3-3
EN 50338
EN 55014-2
EN 55014-1
EN 60335-2-29 : 88
EN 61558-2-6 : 97
National standards
VDE 0730 T 2 ZP
VDE 0730 T 1
Cutting width: 38 cm
Measured sound power level: 82,2 dB (A)
Guaranteed sound power level: 86 dB (A)
Test centre:
Deutsche Prüfstelle für Land- und Forstwirtschaft
EC identification number: 0363, evaluation according to
noise directive 2000/14 EC Appendix VI
Year of CE marking - 2009
Witten on March 10, 2009
Markus Kress
Executive Director
2
.