Setting The Machine - Imetec N0001 Instrucciones De Uso

SETTING THE MACHINE

• Press the MENU button (16) repeatedly to select the desired program (fig. C). The
program number (9A) and duration (9B) appear on the display (9).
• Press the
EN
(fig. D).
• Press the
browning level (fig. E) until the indicator (9C) corresponds to the correct selection.
• Longer baking: select DARK browning.
• Short baking: select LIGHT browning.
NOTE: Stop any program in progress by pressing the START/STOP
button (10) for a few seconds
WARNING! Risk of burn. DO NOT touch the external
surfaces during operation and until the appliance is
completely cooled down.
WARNING! The bread may burn and produce flames
and / or smoke. DO NOT use water. Disconnect
the appliance and use a damp cloth to put out any
flames.
MAKING THE RECIPE
• Press the START/STOP button (10) to start the program (fig. G): the time remaining at
the end of the program is updated on the display (9).
The machine automatically proceeds in the various stages of bread-making.
It is important not to open the lid during cooking so as not to compromise the result.
WARNING! DO NOT touch the kneading blades with
your hands or utensils while they are operating.
Phase 1: KNEADING
During this phase all the programs emit 4 BEEPS after 30 minutes to allow you to add other
ingredients. No button needs to be pressed; all you have to do is open the lid and add the
ingredients.
The lid can be kept open during this phase to check on process.
Phase 2: RISING
Three or four rising sessions are required, depending on the program.
Keep the lid closed during the rising session to keep the breadmaker at the ideal temperature.
Only for loaves (1,2,3,5,6,7): extraction of mixing blade (17C).
For loaves, the mixing blade (17C) can be removed at the beginning of the last rising session.
The precise moment is indicated in the TIME TABLE, under "extraction of the mixing blade" and
must be calculated from the time the program is started by pressing START: e.g. for program 1,
103 minutes after starting.
22
WEIGHT button (11) repeatedly to select the weight of the load
BROWNING button (15) to select the LIGHT, MEDIUM or DARK
.