Troubleshooting - Imetec N0001 Instrucciones De Uso

The machine is equipped with a protection device, which, in the event of a power outage
(max 10 minutes), keeps the memory active and ensures continuation of the recipe.
EN
Should one of the problems indicated occur, adopt the proposed solution:
Problem
No power.
A selected program does not start.
A selected program does not start
and the error HHH appears on the
display.
A selected program does not start
and the error LLL appears on the
display.
After transferring the dough, a
program for bread rolls or ciabatta
bread does not start.
White smoke is emitted from the
baking chamber and you can smell
the typical burning smell.
Smoke comes out of the baking
chamber.
The motor is running but the
kneading session does not start.
Noise during rotation.
The loaf container (17) comes out of
its place while kneading.
An error code appears on the
display: Err.
26

TROUBLESHOOTING

The machine maintains the stored programming for 10
minutes. If power returns within this time, the recipe will
continue. Beyond this time, programming will be cancelled.
A delayed start has been set or the START/STOP button
has not been pressed.
The appliance is still hot because the bread-making process
has just been completed. Wait for the machine to cool down
completely (about 40 minutes).
The machine is too cold. Bring it to a warmer spot.
More than 30 minutes have elapsed since the 10 BEEPS
that indicate the transfer.
Kneading residue at the bottom of the baking chamber.
Turn the machine off, unplug it and clean the baking
chamber, after letting the appliance cool down completely.
NEVER intervene with water.
The steam output is normal during the baking phase.
The mixing blade (17C) is not inserted.
Stop the machine and insert the mixing blades properly.
The load container (17) is not inserted well.
Stop the machine and insert the loaf container (17) correctly
or insert the mixing blades.
The loaf container (17) is not fully inserted. Stop the
machine and insert it correctly.
The machine emits alert BEEPS continuously.
Stop the BEEPS by pressing the START/STOP button.
Bring the appliance to an authorised Imetec assistance
centre and indicate the error code.
Solution