Cleaning And Maintenance; Energy Consumption And Protection In Case Of A Power Cut - Imetec N0001 Instrucciones De Uso

The delayed start function is enabled only with programs 1,2,3,4,5,6,8,10 and 11.
• Add the ingredients to the loaf container (17) in the following order: liquid ingredients,
flour, yeast, salt and sugar. The last two must not come into contact with each other or
with water.
• Select the program, the weight and the desired baking level as specified in the "USE"
paragraph.
Press the + button and the maximum delay will appear on the display 13:00 (hours)
Press the - button to decrease the delay (up to the minimum required by the program)
Press the + button to increase the delay in case of an error (up to the minimum time
required by the program). The time varies by 10' every time the + and - buttons are
pressed.
• Press the START/STOP button (10) (fig H).
• The machine will be in standby for the programmed time.
• Unplug the power cord (3) from the socket and wait for the appliance to cool down
completely.
• Clean the lid (1), the baking chamber (5) and the heating element (6) with a soft, moist
and well-wrung cloth. Do not use detergents, abrasive products and do not spill liquids.
• Hand wash the loaf container (17), the mixing blade (17C), the moulds (18), the support
(19) and the hook to remove the mixing blade (17C) with a soft sponge, hot water and
detergent. If you find it difficult to remove the mixing blade (17C), leave it immersed in
hot water for a few minutes.
• Clean the main body (4) with a well-wrung damp cloth.
• Dry well.
• Put the containers back making sure not to scratch them. Clean the appliance after
having used it.
WARNING! Always disconnect the appliance from
the mains supply before cleaning or performing
maintenance.
WARNING! Risk of crushing. Remove the lid before
any cleaning operation.
WARNING! Once you have finished using this
appliance, make sure it has cooled down completely
before putting it away.

ENERGY CONSUMPTION AND PROTECTION IN CASE OF A POWER CUT

The machine consumes the maximum power during the final baking phase. It consumes
only a few watts during the kneading, rising and standby phases.

CLEANING AND MAINTENANCE

EN
25