Pausing The Appliance - Amibot Glass AG31 Manual De Instrucciones

EN
Operating the appliance
Choosing the cleaning mode
Automatic mode: Before starting its cleaning cycle, AMIBOT scans
the perimeter to analyse the shape of the glazed surface and define
its cleaning route.
Choice of modes: Choose from 4 cleaning modes using the remote
control:
N
1. N Mode: This mode is suitable for particularly long surfaces.
2. Z Mode: This mode is suitable for particularly high surfaces.
3. Z/N Mode: AMIBOT automatically alternates between Z and N
modes.
4. Manual Mode: You can guide AMIBOT using the arrow buttons
on the remote control.
NOTE: If the appliance detects a loss of suction during its cycle, it beeps and goes in
the opposite direction.

Pausing the appliance

Press the Start/Pause button on the robot (1) or the Pause button on
the remote control (5) to stop or pause the robot.
10
Z