Amibot Glass AG31 Manual De Instrucciones página 18

EN
Troubleshooting
The robot does not
work correctly after
being switched on.
The top and bottom
indicator lights flash
RED, the robot beeps
continuously.
The bottom and
top indicator lights
flash RED and BLUE
successively.
The remote control
does not work.
There is a problem
with the edge detection
sensors.
The robot is not
connected to the power
adapter correctly.
There is a problem with
the motherboard.
1. The batteries
are not installed
or need to be
replaced.
2. The remote control
is broken.
16
1. Check that the cleaning
pad is correctly attached
to the Velcro fastenings
without overlapping the
edge sensors.
2. Contact the AMIBOT
after-sales service if the
edge sensors do not
work correctly.
Check that the robot is
connected to the power cable
correctly and that the power
cable is plugged in correctly.
Contact AMIBOT after-sales
department.
1. Change the batteries.
2. Replace the remote
control for a new one.