Amibot Animal Premium Manual De Usuario página 15

Operating the robot
Inserting the H2O tank
The vacuum mode stops when the cleaning mode is selected; the
vacuum stops when the robot detects the water compartment.
Clip it to the back of the robot. The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle. During its cycle, the robot cleans 7 m x 7 m areas.
NOTES:
• The AUTO mode cannot be accessed when the robot is in Mopping Mode.
• You can regulate the H2O tank's water flow intensity by pressing the MAX but-
ton and selecting the desired intensity from 1 to 3.
• Do not use the H2O tank to clean rugs or carpets.
• The H2O tank must be removed from the robot before it is charged.
• The dust remaining on the floor is picked up in the part of the tank intended for
the purpose as the central brush rotates.
• To allow vacuum mode to work, please refer to Vacuum Mode (page 10).
13
EN