Amibot Animal Premium Manual De Usuario página 19

Operating the robot
Press the CLOCK button to cancel a cleaning schedule. You will hear a
beep and a clock symbol and "MON" will flash on the display screen.
Press on the Mapping Mode button to reset the scheduled time to
be shown as " --:-- " (Figure 4). Press this button again to see the
most recent settings. Repeat this action for all the recorded cleaning
schedules. Use the up/down arrows to switch from one cleaning
schedule to another. Press the AUTO button to validate.
NOTES:
• If no action is performed for more than 15 seconds when setting the time, the
robot leaves the setting mode.
• Press the AUTO button to validate the time or it will not be set.
• Scheduled cleaning and the Remote Control times are cancelled when the
batteries are changed. Reset the time and scheduled cleaning time as above.
17
EN