1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observan-
ce:
Key word
Probability of
occurrence
DANGER
Immediate impen-
ding danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
e
operation
Intermediate
An instruction produces a visible inter-
result
mediate result.
Final result
There is a visible final result on com-
"
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if ins-
tructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | FWA 6620 / 6720 / 6820 | 35
2.
User information
2.1
Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Wheel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the FWA 6620 / 6720 / 6820 and must always be hee-
ded.
2.2
Safety instructions
All the pertinent safety instructions can be found
in the separate manual "Important notes on and sa-
fety instructions for Bosch Wheel Test Equipment".
These instructions must be carefully studied pri-
or to start-up, connection and operation of the
FWA 6620 / 6720 / 6820 and must always be heeded.
2.3
Electromagnetic compatibility (EMC)
The FWA 6620 / 6720 / 6820 satisfies the requirements
of the EMC directive 2014/30/EU, EN 301489-1.
Warning! This is a Class A device. The device may cause
radio interference in households. In such cases the user
may be required to take appropriate action.
en
|
1 690 706 113
2017-10-11