Publicidad
Idiomas disponibles
Idiomas disponibles
en
52 | FWA 6620 / 6720 / 6820 | Operation
5.7.12
Printing the test protocol
i
The measurement values are compared to the
manufacturer's setpoint values.
1. Select <F3>.
Preview of the test protocol is displayed.
2. Select
:
The measurement results are printed out.
Abb. 49: Results of measurement print-out
|
1 690 706 113
2017-10-11
5.8
Quick measurement
1. Call up main menu.
Abb. 50: Main menu
2. Select
:
Quick measurement is started.
i
Customer data is not required for quick measure-
ment.
5.8.1
Selecting a vehicle
i
See chapter "Program-driven measurement".
5.8.2
Aligning the measurement boards
i
See chapter "Program-driven measurement".
5.8.3
Compensating the run-out
i
See chapter "Program-driven measurement".
i
The vehicle can also be measured without run-out
compensation:
3. Select <Ctrl + F3>:
Dialog box Deactivate run-out compensation is
opened:
Abb. 51: Dialog box Run-out compensation
Select <F3> or <Continue>.
4.
!
The measuring accuracy is limited following the
measurement of the vehicle without run-out com-
pensation.
Robert Bosch GmbH
Publicidad
