Steelcase Thread Manual Del Usuario página 12

®
(FOR FLOOR MOUNTING)
POWER TRACK INFEED INSTALLATION (Continued)
• Place the infeed cover over the assembled track and lower housings.
• Secure the infeed cover with at least two (2) fasteners, described on page 20, equally spaced in the available nine (9) mounting holes.
• For installations that do not have underlayment, install the infeed cover ramps by engaging the tabs on each ramp with the slots in the infeed cover.
INFEED COVER
FASTENERS
FOR CARPETED INSTALLATIONS ONLY
INFEED COVER RAMPS
SLOT
TAB
Page 12 of 75
24207101 Rev G