Assembling The Nebuliser - Pari SINUS 028 Manual Del Usuario

NOTICE
Danger of device fault caused by dust
If the device is operated in a very dusty atmosphere, more
dust may collect inside the housing and cause a fault in the
device .
• Do not operate the compressor on the floor, under the bed
or in workshops.
• Only operate the compressor in a low-dust environment.
The room in which the compressor is operated must satisfy
certain conditions [see: Operation, page 80]. The compressor
is not intended for outdoor use.
• Connect the power cord to the
power cord socket of the com-
pressor.
• Plug the power plug into a suit-
able socket.

Assembling the nebuliser

CAUTION
Risk of impaired treatment
Damaged components and/or an incorrectly assembled
nebuliser may impair functioning of the nebuliser and thus
treatment as well.
• Check all nebuliser components and the accessories be-
fore each use.
• Replace any broken, misshapen or seriously discoloured
parts.
• Follow the assemble instructions in these instructions for
use.
– 59 –