Drying The Connection Tubes; Maintaining The Compressor - Pari SINUS 028 Manual Del Usuario

4.2 Drying the connection tubes

The PARI SINUS tube system must not be cleaned or
disinfected.
• Insert one of the two tubes into the air connection on the
compressor.
• Switch the compressor on.
• Allow air to blow through the tube until the "Air" has re-
moved all moisture from the tube.
• Switch the compressor off.
• Disconnect the tube from the compressor, and attach the
other tube to the air connection.
• Repeat the process as described for the first tube.

4.3 Maintaining the compressor

Do not attempt to carry out any maintenance on the device un-
less it is switched off and the power plug has been disconnec-
ted from the socket.
Cleaning
WARNING
Danger of electrocution
Liquids can conduct electricity, thereby posing a risk of
electric shock.
• Always switch the compressor off and disconnect the
power plug from the mains socket before starting to
clean it.
– 68 –