4
M04_L0026
M04_L0001
2
M04_L0002
EN
RR 125-200
1
RR 250-300
1
54
KEY TO SYMBOLS
Tightening torque
Threadlocker Medium
Grease
ENGINE OIL
CHECK THE LEVEL
Hold the vehicle upright.
Position the drive on a flat base ensuring
stability.
Remove the inspection cap 1.
The oil level must arrive to the lower edge
of check hole.
Otherwise restore the oil level through
plug 2.
WARNING
The inspection cap is ONLY to check the
oil level. For the oil drain, refer to the para-
graph "REPLACEMENT" on page 56.
Use the oil indicated on page 18 in
the "Recommended lubricants and liquids"
table.