Fiac AB598 Normas Generales Para La Instalacion, Uso Y Mantenimiento página 37

An engine performance decrease, indicates that compressor may need maintenance and / or adjustment by an autho-
rized service center.
Discharge the compressed air from the tank before performing any machine maintenance.
Allow the compressor to cool before performing the maintenance operations.
Always stop engine.
WARNING:
Read the instruction manual before performing maintenance.
The following procedures must be performed when stopping the compressor for maintenance or service.
- Shut off the compressor
- Open the discharge tap.
- Allow the compressor to cool before performing the maintenance operations.
◊ 5.1 Spare parts
When servicing use only original spare parts.
Repairs should be performed only by authorized service center.
◊ 5.2 Maintenance Schedule
Operation
Tank condensate drain
Check oil / fuel leaks
Check motor oil level
(engine and pump unit)
Guards inspection
Check vibrations and/or noise
Check air leaks
Compressor cleaning
Verify and clean, if necessary, the engine
and pump unit air filters.
Check the motor coolant
Check the belt tension
Check the safety valve
Change pump oil
Change engine oil
Replace pump unit air filter
Replace belts
General check by authorised
service center
These are the most common maintenance operations to be performed on compressor.
Carefully read manuals of the individual components (combustion engine and generator), in order to perform correct
maintenance.
5. Compressor maintenance
daily
X
X
X
X
X
X
17
weekly every 300
hours
X
X
X
X
X
X
EN
EN
every 300
hours
X
X
X
x